Hey so I just took my ASTB-E and wasn't going to put anything in here, but I feel obligated to because of how much this website helped me prepare. First of all, I would recommend 3 to 4 weeks to adequately prepare. I studied almost every day for at least 3 to 4 hours during that time -- with maybe a day or two off here and there. Second, I would try and get a good nights rest, if you don't, dont be discouraged because I tried to, but I ended up falling asleep at around 3 am (woke up at 7 to head an hour over to the testing center). Third, I would recommend not studying the day before. I went over my notes for about an hour the day before and that's it. By that point you should be adequately enough prepared that anything extra you do on the last day would just be overkill and can end up stressing you out. Remember, sometimes less is more.
As for the actual test: I would write these topics down so you have an outline of what you're going to tackle to study.
- I'm going to go in order of the sections for this and also going to attach videos from youtube that helped me a lot-
Math Skills Test (MST):
Know how to multiply, subtract, and add matrices. Know your log and exponent rules. Know your basic and advanced DRT (Distance/Rate/Time) problems. Work on doing basic algebra (addition, subtraction, multiplication, division) without a calculator because you for damn sure won't be able to use it on the test. Know your basic probability (1/6 chance to roll a 6... so what are your odds of rolling a 6 twice in a row --> 1/6 * 1/6 = 1/36, etc.). I don't know what it's called, but the labor problems are a big part of the test (it takes 4 hours to do this job with x people how long does it take with y people or it takes 5 people 6 hours to do this specific job and after 3 hours one additional person is added to the team to help every subsequent hour, how long does it take to finish the project?). I know it seems simple, but know how to do your basic fractions and percentages. Know weighted percentages, averages, and averages in general (Joe got a 54, 53, and 52 on the first three tests, what should he get on the last two tests to get an 80... or test a is worth 20% and test b is worth 80%, if he got a 60 on test a what does he need to get a 90?) Know basic geometry like area of a circle or rectangle, what kind of triangles have what features (like the equilateral triangle having all the same sides), arc length, etc. Know how to calculate volume or surface area for cubes, cylinders, and cones. I had a cone question. Know how to use FOIL and how to solve for x in equations that are (x^2 +4x +4). Go at a deliberate pace, you have time, but just remember you don't have ALL day. also learn your perfect numbers (6,28, 496...etc. you probably only need to know the first 4)
Reading Comprehension Test (RCT):
The reading was really dry and I had to reread a lot of the material 3 or 4 times before I got it down. A lot of the choices are correct, but you have to just find the most correct one, or a lot of the choices would be mostly right except one detail that eliminates it. It's pretty much like the SAT reading section, I didn't study for it, but I made sure not to skip that part of my practice test too. If you feel like this may be a weak suit, I recommend practicing.
Mechanical Comprehension Test (MCT):
Understand the basic concepts of classical physics -- I know that may seem like a lot, and it is, but if you study hard for this section, you WILL do well. It's mostly concepts and they are pretty basic ones at that, so this is all about effort on your part. Learn about the mechanical advantage of simple machines. Specifically, pulleys, inclined planes, and levers. Learn about tension, springs, torque, balancing on a fulcrum (I'll provide links to helpful youtube videos). Learn about gears, circuits (parallel and series), Ohm's law (which really isn't a law, but is really helpful with circuits), what work is (w=fd), gravity (and how every object accelerates and decelerates at the same rate towards Earth -- think about dropping a bullet and firing it in the x direction; they're both going to hit the ground at the same time), relativity, quantum, and nuclear physics (nah im just kidding about the last three, but have a basic understanding on how nuclear fission reactors work -- I had a question about control rods). Pendulums, buoyancy, density (both specific density and density in general), and bernoulli's principle will also help. Mostly concepts, but be prepared for a math question or two.
Aviation and Nautical Information Test (ANIT): This one is straight up reading and learning as much as you can about aviation and nautical information. This is where the majority of my notes are. The Barron book I used was very helpful for laying the groundwork, but most of the information, you will find on this website. I'm going to attach the links of the things I found helpful. I do not recommend reading the flight manual. Take that with a grain of salt, because that manual has almost everything about aviation that will be on the test(minus the history stuff). I think it is too dense and too specific to be of that much help for a test like this. You're better off using the Barron's book that I'll post the link too. In addition, the gouge (still not sure what gouge means) on this website for all things ANIT was immensely helpful. Here are the basics of what I learned (this isn't everything by any means): Parts of a ship (orlop, bow/prow, poop deck, starboard, etc., parts of an airplane (ailerons, flaps, fuselage, etc.), the three axes, what basic controls of a plane are, avgas weighs 6 lbs, basic military history of the navy and airforce (what's an F9F panther, who broke the sound barrier and what was it in?XS-1, Chuck Yeager; what was the main strategic bomber in 1950s? B36 Peacemaker, etc.), what drag/weight,thrust, and lift are, your instruments like altimeter, vertical speed indicator, magnetic compass, etc., angle of climb/rate of climb, taxiway lights, lights on the side of a ship, passing a slow plane on the right, etc. There's just way too much for me to put down, but again, you'll only go as far as you study because you can't wing this part.
Naval Aviation Trait Facet Inventory (NATFI):
You can't study for this, it's going to ask you what best describes you and it'll have two choices -- neither will be enticing to pick. Don't sweat it and be honest. This one sucks to get through, but at least you don't have to study for it.
Performance Based Measures Battery (PBM):
This one's also going to suck haha. There's several parts to this one. First, it'll have the compass section where it gives you a heading and asks you to pick the right parking lot. I'll attach the link to the flashcards that helped me as well as a video on how to do it. I practiced this everyday at least once (went through the all 64 flashcards) until the test date -- also they let you practice during the actual test, do that as much as you can until you're comfortable with it. The second part is a dichotic listening section where you have to press certain buttons depending on what ear hears what -- lean to the side where you want to focus on. The third is tracking with a joystick and throttle. This is the hardest part and it's meant to be that way so don't sweat it if you're not doing so hot. Just stay calm, cool, and collected, and do the best you can. I'm 100% sure they designed it to be way too hard for your average jimmy and joe like me. Then they're gonna make you put the dichotic listening with the tracking -- just do your best. What helped me for this, is I got an old halo game and made my controls inverted and played that for a few hours a week to familiarize myself with inverted controls. Finally, they're going to give you "emergency instructions" to do while tracking, write these down and follow the directions. Anyways, my advice is just try your best on this one.
Overall, this is not an easy test, you will not do well unless you study hard, but if you do study hard, regardless of how smart you think you are, you're going to do great.
Here's a link to everything that helped me study. The book I used is Barron's Military Flight Aptitude Tests 4th Edition and I got it off amazon
https://www.amazon.com/gp/product/1438011040/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Really good MCT/ physics videos:
-- pulleys and tension
-- pulleys and tension
-- bernoulli's principle
-- buoyant forces
-- series/parallel circuits
https://www.youtube.com/watch?v=_rSHqvjDksg -- ohm's law
https://www.youtube.com/watch?v=K5vN8jGTU3o -- MA of levers
https://www.youtube.com/watch?v=5Zrphnd_0VI -- torque
Math videos:
https://www.youtube.com/watch?v=xyAuNHPsq-g -- matrices
https://www.youtube.com/watch?v=g5ZGDNxJwxA -- exponent rules
https://www.youtube.com/watch?v=bPLyCH1WaEY -- log rules
https://www.youtube.com/watch?v=D6BTcH_HSf4 -- DRT
https://www.youtube.com/watch?v=gyJSKQRamVo -- DRT
https://www.youtube.com/watch?v=zyMnNbeQ3F4 -- weighted avgs
https://www.youtube.com/watch?v=SlfRoDI3esA -- arc length
ALso the attachments I posted are really helpful especially ANIT gouge and ASTB gouge -- there's also a google drive folder with a lot of really good links, but I don't own it so I don't think I can share it -- if you ask around you can probably get it -- there's a really good math oar practice test with 114 questions. Anyways don't say I never do anything for you guys.
-MD 9/8/9 67
[/QUOTE
