• Please take a moment and update your account profile. If you have an updated account profile with basic information on why you are on Air Warriors it will help other people respond to your posts. How do you update your profile you ask?

    Go here:

    Edit Account Details and Profile

Helicopter pilot dies...

Gatordev

Well-Known Member
pilot
Site Admin
Contributor
So how is it a "freak" accident when anyone who's watched any TV or movie w/ helicopters will see people ducking when entering the arc? Huh, there might be something to that...
 

MasterBates

Well-Known Member
Also keep in mind Civ helo operators do things the USN/USMC would NEVER do (not today anyways)..

Getting out, with the rotors engaged (trim on or a cyclic lock) was not that uncommon. No one at the controls, helo turning.

Done it myself more times than I can count.
 

Sly1978

Living the Dream
pilot
How much flex are the rotors capable of?

I'm not sure about the blades on the Bell that he was in, but on the 60, our tip path - normally around 8' 6" off the ground - is able to droop as low as 4 feet given the right (or wrong) conditions. No one in our community ducks to enter the rotor arc. Of course, we would never have the blades spinning without somebody at the controls, either. Like MasterBates said, though, it's a different world for the civilian pilots.
 

Rubiks06

Registered User
pilot
6'6" is supposedly the lowest the 206 will dip to. Im not sure how much the Bell's differ between but im six three without a helmet. Needless to say i always duck when entering and exiting, I may look like a fool but I like my head where it is.
 

phrogpilot73

Well-Known Member
So how is it a "freak" accident when anyone who's watched any TV or movie w/ helicopters will see people ducking when entering the arc? Huh, there might be something to that...
It could be that old habits die hard... There is almost NO way that you can walk into the rotor arc of a Phrog. The aft head is 16-something feet off the ground, and the forward head is like 10 feet (I'm rusty). I never ducked walking into the rotor arc, although we always walk in from the side, because with the heads in Taxi and a good gust, it can droop down to something like 6 feet.
 

BigIron

Remotely piloted
pilot
Super Moderator
Contributor
We don't duck in 53s. That would be and look ridiculous. It's a fully articulated head, and therefore can dip forward quite a bit. That's why there's a coordinated rotor-arc control effort between the pilots and the longcordsman.
 

Gatordev

Well-Known Member
pilot
Site Admin
Contributor
It could be that old habits die hard... There is almost NO way that you can walk into the rotor arc of a Phrog. The aft head is 16-something feet off the ground, and the forward head is like 10 feet (I'm rusty). I never ducked walking into the rotor arc, although we always walk in from the side, because with the heads in Taxi and a good gust, it can droop down to something like 6 feet.

I agree, and I would at most, dip my head for a sec when going in and out of the arc for the -60, only because of "the chief" mishap and the "4 foot" thing mentioned earlier. But still, it's not like it's unheard of, hence my crack at the "freak" comment.

6'6" for the 206, huh? I swear I've seen it come to my eye level when waiting for someone to get out. Not saying you're lying, just my perspective (I'm 6'2").

Here's a shot of someone who was a little motivated w/ the cyclic while waiting for us to load up mail and a new stab in Panama. Not a huge deal since we go in the side, but it illustrates the 4 foot point.
 

Attachments

  • PICT0049.JPG
    PICT0049.JPG
    1 MB · Views: 174

phrogpilot73

Well-Known Member
I see your "child of the 80's" and I raise you a "long haired hippie" :D
CampDavis_NC_CH-46E_02.jpg

Looks like the heads are in Taxi, but you can see that there's tons of clearance, and no need to duck...
 

HeloBubba

SH-2F AW
Contributor
No one at the controls, helo turning.

Why does this sound like a recipe for disaster?

Done it myself more times than I can count.

In a Navy helo? In the HT's maybe? I recall this as being strictly forbidden in the LAMPS Mk I world. Of course I could be just not recalling correctly (I did separate 21 years ago today). Can anybody out there with West Coast H-2 experience confirm or deny?
 

Gatordev

Well-Known Member
pilot
Site Admin
Contributor
Master is referring to his civilian helo time before the Navy. I've heard similar stories, to include someone losing his nice new 206 because the friction wasn't tight enough and over it came.
 

jamnww

Hangar Four
pilot
I agree, and I would at most, dip my head for a sec when going in and out of the arc for the -60, only because of "the chief" mishap and the "4 foot" thing mentioned earlier. ...

...just my perspective (I'm 6'2")

My only question is how is ducking your head going to help with a -60? :)
 
Top